USB audio codec with I2S and Cmedia driver
CM108AH is a highly integrated single chip USB audio solution. All essential analog modules are embedded in CM108AH, including dual DAC and headphone amplifier, ADC, microphone booster, PLL, regulator, and USB transceiver. Many features are programmable with jumper pins or external EEPROM.In addition, audio adjustment can be easily controlled via specific HID compliant volume control pins. For value added application, external codec or audio DSP can be connected to CM108AH via I2S pin for further processing. 3 GPIO pins can be accessed with customer application software for additional value added application.
- Compliant with USB 2.0 Full Speed Operation
- Compliant with USB Audio Device Class Specification v1.0
- Supports USB Suspend / Resume Mode and Remote Wakeup with Volume Control Pins
- Single 12MHz Crystal Input with On-chip PLL and Embedded USB Transceiver
- Jumper Pin for Speaker Mode (Playback Only) or Headset Mode (Playback + Recording)
- For Headset Mode, USB Audio Function Topology has 2 Input Terminals, 2 Output Terminals, 1 Mixer Unit, 1 Selector Unit, and 3 Feature Units
- Jumper Pin for Mixer Unit Enable / Disable under Headset Mode
- For Speaker Mode, USB Audio Function Topology has 1 Input Terminal, 1 Output Terminal, and 1 Feature Unit
- Support One Control Endpoint, One Isochronous Out Endpoint, One Isochronous In Endpoint, and One Interrupt In Endpoint
- Alternate Zero Bandwidth Setting for Releasing Playback Bandwidth on USB Bus when this Device is Inactive
- Supports AES/EBU, IEC60958, S/PDIF Consumer Formats for Stereo PCM Data at S/PDIF Output
- Volume Up, Volume Down, and Playback Mute Pins support USB HID device class for Host Control Synchronization
- Record Mute Pin with LED Indicator for Record Mute Status
- External EEPROM Interface for Vendor Specific USB VID, PID, and Serial Number
- EEPROM Write Function via Vendor Specific request for Mass Production Convenience
- Customized Embedded VID, PID, Product String, Manufacture String and Volume Settings by Customer Request
- 3 GPIO Pins with Read/Write via HID Interface
- Jumper Pin to Set the Power Mode (100mA or 500mA, Bus Power or Self Power)
- Isochronous Transfer uses Adaptive Mode with Internal PLL for Synchronization
- 48K / 44.1KHz Sampling Rate for Both Playback and Recording
- Soft Mute Function
- Embedded High Performance 16-Bit Audio DAC with Earphone Phone Amplifier
- Host Side Data Loss Noise Reduction Function
- Embedded 16-Bit ADC Input with Microphone Boost
- Embedded Power-On-Reset Block
- Embedded 5V to 3.3V Regulator for Single External 5V Operation
- Compatible with Win 2K / Win XP / Vista / 7, Linux, and Mac OS X without Additional Driver (WinCE / Win Mobile supported with C-Media’s own Driver)
- 48 Pin LQFP Package
-
USB 2.0 high-speed audio processor
USB 2.0 high-speed audio processor
-
USB2.0 Audio Processor
USB2.0 high-speed audio processor that can support the latest USB Audio Class 2.0 and high-definitio...
-
USB 2.0 audio chip with integrated 8051
CM6500B is a USB 2.0 audio chip with integrated 8051 for flexible applications. With internal 2-chan...
-
USB 2.0 audio chip with integrated 8051 and equalizer
CM6510B is a USB 2.0 audio chip with integrated 8051 for flexible applications. With internal 2-chan...
-
Design
Offering a wide selection of value-added design services, spanning PCB layout through to full product design.
-
Manufacturing
Delivering the most efficient and cost effective electronic manufacturing solution to the customer.
-
Kitting
Reduce the total cost of component acquisition and achieve greater profitability.
-
Products
Franchised component distribution, focussing on power, storage, interface and wireless solutions.
-
Inventory
Streamline component procurement and improve your working capital.